fbpx
6kW-10kW-lg (1)

8KW Generator

Details

Powered by a Kubota diesel engine, this durable generator set produces 8.0 kilowatts of prime power output. The engine and generator are directly coupled and mounted on a rugged steel skid. All components are suitable for prime or intermittent usage. The entire set is thoroughly load tested prior to shipment. UL approved construction.

Standard engine

  • Kubota diesel model D1105BG-3, in-line, three-cylinder engine
  • Mechanical speed governing provides > 5% speed regulation, no load to full load
  • EPA tier 4
  • Liquid cooled with industrial grade radiator and belt-driven blower fan

Controls & accessories

  • Key start panel with oil pressure, coolant temperature, hour meter, and glow plug indicator
  • Manual safety shutdow override, fuse protection
  • Safety shutdowns, energized-to-run, for low oil pressure/high coolant temperature
  • Four anti-vibration mounts between generator set and base frame
  • Electric fuel transfer and priming pump (12 VDC)
  • Battery cables for 12 VDC starting system

Specifications

Engine technical information
ManufacturerKubota
ModelD1105BG-3
Cylinders3
Bore x Stroke3.07 x 3.09 in
Displacement1123cc (68.53 cu in)
Comp. ratio24:1
Engine weight242 lb dry
Fuel system
Fuel type#2 Diesel or #1 ULSD
Injection pumpBosch PFR
Nozzle typeThrottle type
Transfer pumpElectric, 12 VDC
Fuel lift1 meter (3.3 ft)
Suction fitting5/16″ push on
Return fitting3/16″ push onOptional 1/4 in suction and return fittings on the skid.
Specific fuel consumption0.77 gph @ full load0.42 gph @ half load(Actual fuel consumption varies with site conditions and fuel energy content.)
Lube oil system
GradeAPI classification CF or other approved.(See owner’s manual)
Capacity1.3 US gal
FilterFull flow, spin on
Air intake system
FilterReplaceable element
Combustion air29.7 cfm
Total system restriction20″ H20
DC Electrical system
Starter12V, 1.0 kW
Alternator12V, 30 Amp
Glow plugs locationCombustion chambers
Battery required12V 650 CCA equiv, min
Run solenoid12V Energize to run
Ancillary equipment
MountingSteel base with mounting holes
IsolatorsFour composite mounts
Generator technical information
ManufacturerMecc Alte
ModelECP 28 (standard)
ConstructionFour pole, brushless, open drip-proof (IP23), single bearing
Excitation (std)Full wave bridge rectifier
Excitation (opt)“Excitation Boost System”(Provides up to 300% current for motor starting.)
Cooling air flow286 cfm
Leads4 or 12, application dependent
60 Hz voltages (continuous)240 1-phase: 36.6 Amps208 3-phase: 30.5 Amps480 3-phase: 13.2 Amps
Power factorSingle phase ratings @ 1.0 PFThree phase ratings @ 0.8 PF
Voltage reg.DSR digital type +/- 1% NL -> FL
Temperature rise105C rise prime
Tel. interferenceTHF <2%
Winding pitchTwo thirds
Control systemSelf-excited
Cooling system
RadiatorFinned tube type
MaterialCopper core, soldered tanks
Pressure12.9 psi max
Fan typeBlower, nylon
Water pumpGear case mounted
TypeCentrifugal, belt drive
ThermostatWax pellet type
Recommended coolant50/50Use low silicate ethylene glycol and high quality water. Consult manufacturer for details.
Cooling air required1206 cfm
Exhaust system
Muffler typeIndustrial grade
MountingVertical
Restriction1.5 in Hg max
Weight & dimensions
Please contact salesperson for weight and dimensions.

Accessories

Coming soon…

Model #

KPG-08

Manufacturer

ESI

Category

Generators

Highlight Specs

Continuous Three-Phase Output (KVA): 11
Output Phase: 1Ø or 3Ø
Rated Speed (60hz): 1800 RPM
Engine: Kubota D1105
Emission Certificate: EPA Tier 4 Final
Configuration: Open Skid

VIDEOS